D-Link DES-3326S Reference Manual - Page 196
create ipif
UPC - 790069242755
View all D-Link DES-3326S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual create ipif Purpose Syntax Description Parameters Restrictions Used to create an IP interface on the switch. create ipif {state [enabled/disabled]} This command will create an IP interface. − The name for the IP interface to be created. − The name of the VLAN that will be associated with the above IP interface. − IP address and netmask of the IP interface to be created. You can specify the address and mask information using the traditional format (for example, 10.1.2.3/255.0.0.0 or in CIDR format, 10.1.2.3/16). state [enabled/disabled] − Allows you to enable or disable the IP interface. Only administrator-level users can issue this command. 196 IP Interface Commands
DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual
196
IP Interface Commands
create ipif
Purpose
Used to create an IP interface on the switch.
Syntax
create ipif <ipif_name> <vlan_name>
<network_address> {state
[enabled/disabled]}
Description
This command will create an IP interface.
Parameters
<ipif_name>
-
The name for the IP interface
to be created.
<vlan_name>
-
The name of the VLAN that
will be associated with the above IP
interface.
<network_address>
-
IP
address
and
netmask of the IP interface to be created.
You can specify the address and mask
information using the traditional format (for
example, 10.1.2.3/255.0.0.0 or in CIDR
format, 10.1.2.3/16).
state [enabled/disabled]
-
Allows you to
enable or disable the IP interface.
Restrictions
Only administrator-level users can issue
this command.