D-Link DES-3326S Reference Manual - Page 148
Broadcast Storm Control Commands
UPC - 790069242755
View all D-Link DES-3326S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual config traffic control Purpose Used to configure broadcast/multicast traffic control. Syntax config traffic control [/all] broadcast [e nable d/di sable d]/m ult i c ast [enabled/disabled]/dlf [enabled/disabled]/threshold Description This command is used to configure broadcast storm control. Parameters − Used to specify a broadcast storm control group with the syntax: module_id:group_id. all − Specifies all broadcast storm control groups on the switch. broadcast [enabled/disabled] − Enables or disables broadcast storm control. multicast [enabled/disabled] − Enables or disables multicast storm control. dlf [enabled/disabled] − Enables or disables dlf traffic control. threshold − The upper threshold at which the specified traffic control is switched on. The is the number of broadcast/multicast/dlf packets, in Kbps, received by the switch that will trigger the storm traffic control measures. Restrictions Only administrator-level users can issue this command. 148 Broadcast Storm Control Commands