D-Link DES-3326S Reference Manual - Page 43

DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual reset Purpose Syntax Description Parameters Restrictions Used to reset the switch to the factory default settings. reset {config/system} This command is used to restore the switch's configuration to the default settings assigned from the factory. config − If config is specified, all of the factory default settings are restored on the switch except for the IP address, user accounts, and the switch history log. system − If system is specified all of the factory default settings are restored on the switch. If no parameter specified, the switch's current IP address, user accounts, and switch history log are retained. All other parameters are restored to their factory default settings. Only administrator-level users can issue this command. Example Usage: To restore all of the switch's parameters to their default values: Basic Switch Commands 43