D-Link DES-3326S Reference Manual - Page 126
Spanning Tree Commands
UPC - 790069242755
View all D-Link DES-3326S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual config stp Restrictions network devices when STP is disabled on the switch. The default is enabled. Txholdcount - the maximum number of Hello packets transmitted per interval. Default value = 3. version [rstp/stp] - select the Spanning Tree Protocol version used for the switch. For IEEE 802.1d STP select stp. Select rstp for IEEE 802.1w Rapid STP. Only administrator-level users can issue this command. Example Usage: To configure STP with maxage 18 and hellotime 4: DES-3326SR:4#config stp maxage 18 hellotime 4 Command: config stp maxage 18 hellotime 4 Success. DES-3326SR:4# 126 Spanning Tree Commands
DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual
126
Spanning Tree Commands
config stp
network devices when STP is disabled on
the switch. The default is enabled.
Txholdcount
<1-10>
-
the
maximum
number of Hello packets transmitted per
interval. Default value = 3.
version [rstp/stp] - select the Spanning Tree
Protocol version used for the switch. For
IEEE 802.1d STP select stp. Select rstp for
IEEE 802.1w Rapid STP.
Restrictions
Only administrator-level users can issue
this command.
Example Usage:
To configure STP with maxage 18 and hellotime 4:
DES-3326SR:4#config stp maxage 18 hellotime 4
Command: config stp maxage 18 hellotime 4
Success.
DES-3326SR:4#