D-Link DES-3326S Reference Manual - Page 51

DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual show ports Purpose Syntax Description Parameters Used to display the current configuration of a range of ports. show ports {} This command is used to display the current configuration of a range of ports. − Specifies a range of ports to be configured. The port list is specified by listing the beginning port number and the highest port number of the range. The beginning and end of the port list range are separated by a dash. For example, 3 would specify port 3. 4 specifies port 4. 3-4 specifies all of the ports between port 3 and port 4 − in numerical order. Restrictions none. Example Usage: To display the configuration of the ports 1-7 of module 1: DES-3326SR:4#show ports 1-7 Port Port State ---- -------1 Enabled 2 Enabled 3 Enabled 4 Enabled Settings Speed/Duplex Auto Auto Auto Auto Connection Speed/Duplex Link Down Link Down Link Down Link Down Address Learning ----------Enabled Enabled Enabled Enabled Switch Port Commands 51