D-Link DES-3326S Reference Manual - Page 321
config ospf aggregation
UPC - 790069242755
View all D-Link DES-3326S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 321 highlights
DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual Command: delete ospf aggregation 10.1.1.1 10.48.76..122/16 Lsdb_type summary Success. DES-3326SR:4# config ospf aggregation Purpose Used to configure the OSPF area aggregation settings. Syntax config ospf aggregation lsdb_type [summary] advertise [enabled/disabled] Description This command is used to configure the OSPF area aggregation settings. Parameters − A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain. − The 32-bit number in the form of an IP address that uniquely identifies the network that corresponds to the OSPF Area. lsdb_type [summary] − Specifies the type of address aggregation. advertise [enabled/disabled] − Allows for the advertisement trigger to be enabled or disabled. Restrictions Only administrator-level users can issue this command. OSPF Configuration Commands 321