D-Link DES-3326S Reference Manual - Page 87
This command sends Internet Control - des 3326sr default ip
UPC - 790069242755
View all D-Link DES-3326S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual ping Purpose Syntax Description Parameters Restrictions Used to test the connectivity between network devices. ping {times } {timeout } This command sends Internet Control Message Protocol (ICMP) echo messages to a remote IP address. The remote IP address will then "echo" or return the message. This is used to confirm connectivity between the switch and the remote device. − the IP address of the remote device. times − the number of individual ICMP echo messages to be sent. A value of 0 will send an infinite ICMP echo messages. The maximum value is 255. The default is 0 timeout − defines the time-out period while waiting for a response from the remote device. A value of 1 to 99 seconds can be specified. The default is 1 second. Only administrator-level users can issue this command. Network Management Commands 87