Dell 3010cn Color Laser Printer Printer Menus - Page 10
TCP/IP, Protocol
View all Dell 3010cn Color Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Uses 100base-TX full-duplex. 100Base Full TCP/IP Purpose: To specify the TCP/IP settings. The change becomes effective after the printer is turned off and then on again. Values: Automatically sets the IP address. IP AddressSetup AutoIP* Uses BOOTP to set the IP address. BOOTP RARP Uses RARP to set the IP address. Uses DHCP to set the IP address. DHCP Enables the IP address entered on the operator panel. Panel IP Address Displays the IP address allocated to the printer by using the keys on the operator panel. Subnet Mask Displays the subnet mask. Gateway Address Displays the gateway address. Protocol Purpose: To enable or disable each item. The change becomes effective after the printer is turned off and then on again. Values: LPD Enables the LPD port. On* Disables the LPD port. Off Enables the Port9100 port. Port9100 On* Disables the Port9100 port. Off Enables the FTP port. FTP On* Disables the FTP port. Off Enables the UDP. SNMP UDP On* Disables the UDP. Off Enables the E-Mail Alert feature. E-Mail Alert On*