Dell 3010cn Color Laser Printer Printer Menus - Page 96

Installing the Toner and Drum Cartridges

Page 96 highlights

Installing the Toner and Drum Cartridges Installing the Toner Cartridge Installing the Drum Cartridge CAUTION: Before performing any of the following procedures, read and follow the safety instructions in your Owner's Manual. Installing the Toner Cartridge Install or replace the toner cartridge while the printer is on (if the power is not on, the cartridge carrier does not rotate). 1. After confirming the Insert Yellow Toner(Y) message, open the front door. 2. Hold the tape on the protective cover and pull it forward to remove the cover from each cartridge slot. NOTE: You need to remove the protective cover only the first time that you install the toner. NOTE: Dispose of the protective cover after you remove it. NOTE: The protective cover is attached to each toner cartridge mount. 3. Make sure the color of the toner cartridge matches the slot on the toner cartridge carrier. The order is Y, M, C, K. Gently shake the cartridge to distribute the toner evenly. 4. Lift the tab up 90 degrees and pull the toner seal straight off, keeping it parallel with the toner cartridge.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122

Installing the Toner and Drum Cartridges
Installing the Toner Cartridge
Installing the Drum Cartridge
Installing the Toner Cartridge
Install or replace the toner cartridge while the printer is on (if the power is not on, the cartridge carrier does not rotate).
1.
After confirming the
Insert Yellow Toner(Y)
message, open the front door.
2.
Hold the tape on the protective cover and pull it forward to remove the cover from each cartridge slot.
3.
Make sure the color of the toner cartridge matches the slot on the toner cartridge carrier. The order is Y, M, C, K. Gently shake the cartridge to distribute
the toner evenly.
4.
Lift the tab up 90 degrees and pull the toner seal straight off, keeping it parallel with the toner cartridge.
CAUTION:
Before performing any of the following procedures, read and follow the safety instructions in your
Owner's Manual
.
NOTE:
You need to remove the protective cover only the first time that you install the toner.
NOTE:
Dispose of the protective cover after you remove it.
NOTE:
The protective cover is attached to each toner cartridge mount.