Dell Brocade 5100 Fabric OS v7.0.2 Release Notes v1.0 - Page 12
For the Brocade DCX/DCX-4S and DCX 8510-8/DCX 8510-4
View all Dell Brocade 5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
• Brocade 7800 - On the pull-out tab on the front left side of the chassis underneath the serial console and Ethernet connection and on the bottom of the switch in a well on the left side underneath (looking from front) • Brocade 8000 - On the switch ID pullout tab located inside the chassis on the port side on the left and also on the bottom of the chassis • Brocade DCX, DCX 8510-8 - Bottom right of the port side • Brocade DCX-4S, DCX 8510-4 - Back, upper left under the power supply 3. World Wide Name (WWN) When the Virtual Fabric feature is enabled on a switch, each logical switch has a unique switch WWN. Use the wwn command to display the switch WWN. If you cannot use the wwn command because the switch is inoperable, you can get the primary WWN from the same place as the serial number, except for the Brocade DCX/DCX-4S and DCX 8510-8/DCX 8510-4. For the Brocade DCX/DCX-4S and DCX 8510-8/DCX 8510-4 access the numbers on the WWN cards by removing the Brocade logo plate at the top of the non-port side. The WWN is printed on the LED side of both cards. 1. License Identifier (License ID) There is only one License Identifier associated with a physical switch or director/backbone chassis. This License Identifier is required as part of the ordering process for new FOS licenses. Use the licenseId command to display the License Identifier. Fabric OS v7.0.2 Release Notes v1.0 Page 12 of 99