Dell Brocade 5100 Fabric OS v7.0.2 Release Notes v1.0 - Page 84

Closed with Code Change in Fabric OS v7.0.0c Defect ID: DEFECT000365069 Technical Severity: High Summary: ICL Ports on 8510 directors show "Mod_Val" on 1 out of 4 ports on a QSFP. Symptom: Event log indicates bad QSFP requiring reseat or replacement. Workaround: Reseating QSFP may correct the issue. Feature: 16G Hardware Function: 16G QSFP Probability: Low Found in Release: FOS7.0.0 Defect ID: DEFECT000365071 Technical Severity: High Summary: QSFP port status is not refreshed in WebTools port admin window. Symptom: Insertion/Removal of QSFP is not reflected in Port Admin window. Workaround: Refresh, or close and re-open Port Admin window. Feature: WebMgmt Function: Ports Admin Probability: Medium Found in Release: FOS7.0.0 Defect ID: DEFECT000365075 Technical Severity: High Summary: QSFP ICL ports are being fenced due to excessive state changes even though current high threshold value is not exceeded Symptom: QSFP ICL links are getting fenced unexpectedly. Feature: FABRIC WATCH Function: PORT FENCING Probability: Low Found in Release: FOS7.0.0 Defect ID: DEFECT000365794 Technical Severity: High Summary: In an IPSec configuration between FX8-24 and 7800, some circuits never come online Symptom: IPSec circuits stuck in a In-progress state. Feature: FCIP Function: FCP TCP/IP Stack Probability: Low Found in Release: FOS7.0.1 Defect ID: DEFECT000368931 Technical Severity: High Summary: Deprecate FruReplace CLI command in FOS Symptom: Use of FruReplace command in the process of performing replacement of a defective WWN card will result with a potential failed transfer leaving the replacement WWN card unusable. Feature: FOS-Infrastructure Function: Other Probability: Low Found in Release: FOS7.0.0 Service Request ID: 673189 Fabric OS v7.0.2 Release Notes v1.0 Page 84 of 99