Dell Brocade 5100 Fabric OS v7.0.2 Release Notes v1.0 - Page 72
Port Fencing
View all Dell Brocade 5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Closed with Code Change Defects in Fabric OS v7.0.1 Defect ID: DEFECT000359518 Technical Severity: High Summary: Cannot remove configured Admin Domain if defzone is configured as "allaccess" Symptom: Customer unable to remove admin domains when defzone --allaccess is set (which is an invalid configuration, involving an unlikely "loophole" to configure.) Workaround: remove zone files from switch and reboot Feature: Field Escalation Function: Fabric Services Probability: Low Found in Release: FOS6.2.2 Service Request ID: 336453 Defect ID: DEFECT000362720 Technical Severity: High Summary: If an F_Port trunk has gone down and stays offline, the switch may panic during code upgrade. Symptom: Director may experience hafailover and switches reboot caused by kernel panic while doing zone check. Feature: Field Escalation Function: Panic / OOM Probability: Low Found in Release: FOS6.3.2 Service Request ID: 653815 Defect ID: DEFECT000364137 Technical Severity: High Summary: FabricWatch Port Class is not monitoring ICL ports. E-Port Class monitors are monitoring ICL ports. Symptom: ICL Ports will not report any threshold warnings and will not be fenced for Port Class attributes. Feature: FABRIC WATCH Function: PORT FENCING Probability: High Found in Release: FOS7.0.0 Defect ID: DEFECT000364443 Technical Severity: High Summary: Compact Flash became 100% full on BES after switch panic. Symptom: BES crashed and rebooted and left a large corefile which is saved in Compact Flash, causing it to fill up. Feature: Field Escalation Function: OS: Linux Probability: Low Found in Release: FOS6.4.1 Service Request ID: 660833 Where Else Fixed: FOS6.4.2 b GA Defect ID: DEFECT000364799 Technical Severity: High Summary: After downgrading from v7.0.0 to v6.4.x, a route rebalance or recalculation will cause some ICL paths to be blocked. Symptom: Connectivity between devices lost after route change. Workaround: Disable all ICL ports and then enable all ICL ports Feature: UNDETERMINED Function: UNDER REVIEW Probability: High Found in Release: FOS6.4.2 Fabric OS v7.0.2 Release Notes v1.0 Page 72 of 99