Dell Brocade 5100 Fabric OS v7.0.2 Release Notes v1.0 - Page 93

Closed with Code Change in Fabric OS v7.0.0b Defect ID: DEFECT000359160 Technical Severity: Medium Summary: Not able to enable NPIV on FCoE ports. Symptom: If NPIV had been disabled on FCoE ports prior to upgrading to v7.0, NPIV cannot be enabled on those FCoE ports. Feature: Field Escalation Function: FCoE Probability: Low Found in Release: FOS7.0.0 Service Request ID: 639985 Defect ID: DEFECT000360186 Technical Severity: Medium Summary: Brocade Encryption Engine doesn't handle Logout Extended Link with Initiator correctly. Symptom: When the initiator issues logout to Encryption engine it received a response it was successful, but then the initiator is able to successfully issue a read command to the encryption engine. Feature: Data Security Function: Other Probability: Low Found in Release: FOS7.0.0 Defect ID: DEFECT000360329 Technical Severity: Medium Summary: FSPF error message, "FSPF returned count_size 4 rc -5!!!!!" due to MSd call in FICON mode Symptom: FSPF error message appears out as soon as the CEC POR is started. It does not appear in the errdumpall output. Feature: FC Services Function: FSPF Probability: Low Found in Release: FOS6.4.2 Defect ID: DEFECT000360537 Technical Severity: Medium Summary: Certain traffic patterns causing back end CRC errors on FC8-64 Blades in Slots 3 and 9 of DCX Symptom: Experiencing CRC errors with good EOF when FC8-64 blades are installed in slots 3 or 9 of a DCX system. Feature: 16G Platform Services Function: Other Probability: Low Found in Release: FOS7.0.0 Defect ID: DEFECT000361820 Technical Severity: Medium Summary: CS_CTL potential marking issue due to Condor-2 to Blaster port toggle on FWDL Symptom: With the CS_CTL bit being set properly, data is not traversing the correct FCIP H/M/L QoS connection. Feature: 8G ASIC Driver Function: ASIC Driver Probability: Low Found in Release: FOS7.0.0 Fabric OS v7.0.2 Release Notes v1.0 Page 93 of 99