Dell Brocade 5100 Fabric OS v7.0.2 Release Notes v1.0 - Page 76
Defect ID, Technical Severity, Summary, Symptom, Feature, Function, Probability, Found in Release,
View all Dell Brocade 5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Closed with Code Change Defects in Fabric OS v7.0.1 Defect ID: DEFECT000339701 Technical Severity: Medium Summary: Even after removing the device from the LSAN zoning, nsinfo.html for switch is not updated with removed devices. Symptom: nsinfo.html may not be updated with devices that have been removed from an LSAN zone. Feature: 8G FCR Function: FCR Daemon Probability: Medium Found in Release: FOS6.4.2 Defect ID: DEFECT000342412 Technical Severity: Medium Summary: TPERF session may not be able to be restarted until all user disabled GE ports on the test tunnel are re-enabled. Symptom: If a user disables GigE ports on a TPERF test tunnel while a TPERF session is in progress and the TPERF session is subsequently terminated, TPERF may not be able to be restarted until the disabled GigE ports are re-enabled. When in this state, if the user attempts to re-start TPERF, they will get a message indicating that a TPERF session is already in progress. Feature: FCIP Function: FCIP CLI Probability: Low Found in Release: FOS7.0.0 Defect ID: DEFECT000342738 Technical Severity: Medium Summary: Enhancement to BE credit loss detection and recovery Symptom: Previously, if backend credit is lost, the user needs to reseat the blade to recover. This release added user configuration options to generate link reset, port re-init, or blade fault upon detection of backend credit loss. Feature: 8G ASIC Driver Function: ASIC Driver Probability: Low Found in Release: FOS7.0.0 Where Else Fixed: FOS6.3.2 c, FOS6.4.2 a Defect ID: DEFECT000345346 Technical Severity: Medium Summary: For 16G platforms, configdefault may lead to an invalid port speed configuration state if ports in the same group are in different logical switches. Symptom: If configdefault is executed in the default switch, portcfgoctetspeedcombo settings will get set to default on all logical switches. Feature: ConfigMgmt Function: Config Download Probability: Medium Found in Release: FOS7.0.0 Fabric OS v7.0.2 Release Notes v1.0 Page 76 of 99