Dell Brocade 5100 Fabric OS v7.0.2 Release Notes v1.0 - Page 89

Closed with Code Change in Fabric OS v7.0.0b Defect ID: DEFECT000357943 Technical Severity: High Summary: Trackchanges is not generating TRK-1003 for SSH logout. Symptom: With a Trackchanges setting of 1,1, the track changes feature is not generating the TRCK1003 message when a SSH session is logged out. Feature: FOS Security Function: Authentication Probability: High Found in Release: FOS6.4.1 Service Request ID: 631887 Defect ID: DEFECT000359245 Technical Severity: High Summary: The NS contains stale entries after a bad disk is remove from a loop attached device. Symptom: When a disk is removed from a loop attached device, the pid still shows up in the name server. Workaround: port bounce where the device connected. Feature: FC Services Function: Name Server Probability: Medium Found in Release: FOS6.3.2 Service Request ID: 641021 Defect ID: DEFECT000359493 Technical Severity: High Summary: If FX8-24 blades are swapped, the Inband Mgmt configuration is not properly loaded onto the new blade. Symptom: Inband Mgmt is not functioning after FX8-24 blade is replaced (swapped). Workaround: Reboot CP Feature: FCIP Function: Other Probability: Low Found in Release: FOS7.0.0 Defect ID: DEFECT000360527 Technical Severity: High Summary: An FCIP Tunnel in an FCR Backbone may lose buffer credits and go down if FastWrite is enabled. Symptom: FCIP Tunnel in an FCR backbone fabric goes down due to credit loss. Workaround: Disable FCIP FW. Feature: FCIP Function: Other Probability: Low Found in Release: FOS7.0.0 Defect ID: DEFECT000349412 Technical Severity: Medium Summary: portcfgshow output displays "Fill Word (Current)" incorrectly Symptom: portcfgshow displays incorrect values for "Fill Word (Current)" field Feature: 8G ASIC Driver Function: Other Probability: Medium Found in Release: FOS7.0.0 Fabric OS v7.0.2 Release Notes v1.0 Page 89 of 99