Dell Brocade 5100 Fabric OS v7.0.2 Release Notes v1.0 - Page 96

Open Defects in Fabric OS v7.0.1 Beta Defect ID: DEFECT000349012 Technical Severity: High Summary: FICON: Active config is out of synch with FOS indicating a port is blocked after HA failover Symptom: Active configuration indicates port is not blocked. FOS indicates port is blocked. Feature: FICON Function: Ficud Probability: Low Found in Release: FOS7.0.0 Defect ID: DEFECT000349150 Technical Severity: High Summary: BES set to faulty, due to I/O sizes greater than 512KB starting at LBA 0 for a encrypted LUN Symptom: BES goes faulty without clear indication of the reason Feature: Data Security Function: Disk Encryption Probability: Low Found in Release: FOS7.0.0 Defect ID: DEFECT000349589 Technical Severity: High Summary: FICON: CE DE received by host 5 seconds after B1 CCW causing channel timeout Symptom: IFCC - CREJ Code of 00 until the implementation is completed in the patch branch, and the CCW is enabled. Until then, it is responded to as an "Invalid CCW Command" Feature: FICON Function: Ficud Probability: Medium Found in Release: FOS7.0.0 Defect ID: DEFECT000350136 Technical Severity: High Summary: Encrypted/Compressed E-Port trunk goes down following CP failover Symptom: Encrypted link goes down after hafailover and gets stuck at G-Port. Workaround: Slotpoweroff /slotpoweron the blade. Feature: 16G ASIC Driver Function: In-flight encryption/compression Probability: Medium Found in Release: FOS7.0.0 Defect ID: DEFECT000350457 Technical Severity: High Summary: Access Gateway N-port stuck in G-port after code upgrade Symptom: After upgrade fabric switch attached to AG switch with QoS enabled from 6.2.x to 6.3.x, Nport stuck in G-Port. Disable QoS on fabric switch port, port came up fine. Feature: Field Escalation Function: Access Gateway Probability: Low Found in Release: FOS6.3.1 Service Request ID: 610119 Fabric OS v7.0.2 Release Notes v1.0 Page 96 of 99