Dell C1048P Port Extender Networking Configuration Guide for the C9000 Series - Page 385

Clearing the FRRP Counters To clear the FRRP counters, use one of the following commands. • Clear the counters associated with this Ring ID. EXEC PRIVELEGED mode. clear frrp ring-id Ring ID: the range is from 1 to 255. • Clear the counters associated with all FRRP groups. EXEC PRIVELEGED mode. clear frrp Viewing the FRRP Configuration To view the configuration for the FRRP group, use the following command. • Show the configuration for this FRRP group. CONFIG-FRRP mode. show configuration Viewing the FRRP Information To view general FRRP information, use one of the following commands. • Show the information for the identified FRRP group. EXEC or EXEC PRIVELEGED mode. show frrp ring-id Ring ID: the range is from 1 to 255. • Show the state of all FRRP groups. EXEC or EXEC PRIVELEGED mode. show frrp summary Ring ID: the range is from 1 to 255. Troubleshooting FRRP To troubleshoot FRRP, use the following information. Configuration Checks • Each Control Ring must use a unique VLAN ID. • Only two interfaces on a switch can be Members of the same control VLAN. • There can be only one Master node for any FRRP group. Force10 Resilient Ring Protocol (FRRP) 385