Dell C1048P Port Extender Networking Configuration Guide for the C9000 Series - Page 40

Dell(conf-if-te-4/17)#show config ! interface TenGigabitEthernet 4/17 ip address 192.168.10.1/24 no shutdown Dell(conf-if-te-4/17)#no ip address Dell(conf-if-te-4/17)#show config ! interface TenGigabitEthernet 4/17 no ip address no shutdown Layer 2 protocols are disabled by default. To enable Layer 2 protocols, use the no disable command. For example, in PROTOCOL SPANNING TREE mode, enter no disable to enable Spanning Tree. Obtaining Help Obtain a list of keywords and a brief functional description of those keywords at any CLI mode using the ? or help command: • To list the keywords available in the current mode, enter ? at the prompt or after a keyword. • Enter ? after a command prompt lists all of the available keywords. The output of this command is the same as the help command. Dell#? calendar cd change clear clock configure copy debug --More-- Manage the hardware calendar Change current directory Change subcommands Reset functions Manage the system clock Configuring from terminal Copy from one file to another Debug functions • Enter ? after a partial keyword lists all of the keywords that begin with the specified letters. Dell(conf)#cl? class-map clock Dell(conf)#cl • Enter [space]? after a keyword lists all of the keywords that can follow the specified keyword. Dell(conf)#clock ? summer-time Configure summer (daylight savings) time timezone Configure time zone Dell(conf)#clock Entering and Editing Commands Notes for entering commands. • The CLI is not case-sensitive. • You can enter partial CLI keywords. - Enter the minimum number of letters to uniquely identify a command. For example, you cannot enter cl as a partial keyword because both the clock and class-map commands begin with the letters "cl." You can enter clo, however, as a partial keyword because only one command begins with those three letters. • The TAB key auto-completes keywords in commands. Enter the minimum number of letters to uniquely identify a command. • The UP and DOWN arrow keys display previously entered commands (refer to Command History). • The BACKSPACE and DELETE keys erase the previous letter. • Key combinations are available to move quickly across the command line. The following table describes these short-cut key combinations. Configuration Fundamentals 40