Dell Force10 S25-01-GE-24V FTOS 8.4.2.6 Command Line Reference Guide for the E - Page 1049

Table 39-7. Command Example Descriptions: show ip ospf process-id database opaque-area Item Opaque Type Opaque ID Description Displays the Opaque type field (the first 8 bits of the Link State ID). Displays the Opaque type-specific ID (the remaining 24 bits of the Link State ID). Related Commands show ip ospf database Displays OSPF database information. show ip ospf database opaque-as c e s Display the opaque-as (type 11) LSA information. Syntax show ip ospf process-id database opaque-as [link-state-id] [adv-router ip-address] Parameters process-id link-state-id adv-router ip-address Enter the OSPF Process ID to show a specific process. If no Process ID is entered, command applies only to the first OSPF process. (OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value depends on the LSA type, and it can be one of the following: • the network's IP address for Type 3 LSAs or Type 5 LSAs • the router's OSPF router ID for Type 1 LSAs or Type 4 LSAs • the default destination (0.0.0.0) for Type 5 LSAs (OPTIONAL) Enter the keywords adv-router ip-address to display only the LSA information about that router. Command Modes EXEC EXEC Privilege Command History Version 7.8.1.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.1 Introduced support of Multi-Process OSPF. Introduced on S-Series Introduced on C-Series Introduced on E-Series Usage If you are using Multi-Process OSPF, you must enter the Process ID to view information regarding a Information specific OSPF process. If you do not enter the Process ID, only the first configured process is listed. Related Commands show ip ospf database Displays OSPF database information. show ip ospf database opaque-link c e s Display the opaque-link (type 9) LSA information. Syntax show ip ospf process-id database opaque-link [link-state-id] [adv-router ip-address] Open Shortest Path First (OSPFv2 and OSPFv3) | 1049