Dell Force10 S25-01-GE-24V FTOS 8.4.2.6 Command Line Reference Guide for the E - Page 139
show software ifm
View all Dell Force10 S25-01-GE-24V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
Table 5-7. Descriptions of show rpm output Field CP Boot Flash RP1 Boot Flash RP2 Boot Flash CP Mem Size RP1 Mem Size PR2 Mem Size Temperature Power Status Voltage Serial Num Part Num Vendor ID Date Code Country Code Description Displays the two possible Boot Flash versions for the Control Processor. The [Booted] keyword next to the version states which version was used at system boot. Displays the two possible Boot Flash versions for the Routing Processor 1. The [Booted] keyword next to the version states which version was used at system boot. Displays the two possible Boot Flash versions for the Routing Processor 2. The [Booted] keyword next to the version states which version was used at system boot. Displays the memory of the Control Processor. Displays the memory of the Routing Processor 1. Displays the memory of the Routing Processor 2. Displays the temperature of the RPM. Minor alarm status if temperature is over 65° C. Lists the status of the power modules in the chassis. Displays the power rails for the line card. Displays the line card serial number. Displays the line card part number. Displays an internal code, which specifies the manufacturing vendor. Displays the line card's manufacturing date. Displays the country of origin. 01 = USA Related Commands show chassis show linecard show sfm View information on all elements of the system. View information on a line card. View information on the SFM. show software ifm c s Display interface management (IFM) data. Syntax show software ifm {clients [summary] | ifagt number | ifcb interface | stack-unit unit-ID | trace-flags} Parameters clients summary ifagt number Enter the keyword clients to display IFM client information. (OPTIONAL) Enter the keyword summary to display brief information about IFM clients. Enter the keyword ifagt followed by the number of an interface agent to display software pipe and IPC statistics. Control and Monitoring | 139