Dell Force10 S25-01-GE-24V FTOS 8.4.2.6 Command Line Reference Guide for the E - Page 1434
clock summer-time date
View all Dell Force10 S25-01-GE-24V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1434 highlights
www.dell.com | support.dell.com The software clock runs only when the software is up. The clock restarts, based on the hardware clock, when the switch reboots. Dell Force10 recommends that you use an outside time source, such as NTP, to ensure accurate time on the switch. Related Commands ntp update-calendar Set the switch using the NTP settings. clock summer-time date c e s Set a date (and time zone) on which to convert the switch to daylight savings time on a one-time basis. Syntax clock summer-time time-zone date start-month start-day start-year start-time end-month end-day end-year end-time [offset] To delete a daylight savings time zone configuration, enter no clock summer-time. Parameters time-zone start-month start-day start-year start-time end-day end-month end-time end-year offset Enter the three-letter name for the time zone. This name is displayed in the show clock output. Enter the name of one of the 12 months in English. You can enter the name of a day to change the order of the display to time day month year. Enter the number of the day. Range: 1 to 31. You can enter the name of a month to change the order of the display to time day month year. Enter a four-digit number as the year. Range: 1993 to 2035. Enter the time in hours:minutes. For the hour variable, use the 24-hour format, example, 17:15 is 5:15 pm. Enter the number of the day. Range: 1 to 31. You can enter the name of a month to change the order of the display to time day month year. Enter the name of one of the 12 months in English. You can enter the name of a day to change the order of the display to time day month year. Enter the time in hours:minutes. For the hour variable, use the 24-hour format, example, 17:15 is 5:15 pm. Enter a four-digit number as the year. Range: 1993 to 2035. (OPTIONAL) Enter the number of minutes to add during the summer-time period. Range: 1 to1440. Default: 60 minutes Defaults Not configured. Command Modes CONFIGURATION 1434 | Time and Network Time Protocol (NTP)