Dell Force10 S25-01-GE-24V FTOS 8.4.2.6 Command Line Reference Guide for the E - Page 537

Related Commands show processes restartable redundancy auto-failover-limit c e Specify an auto-failover limit for RPMs. When an non-recoverable fatal error is detected, an automatic RPM failover occurs. This command does not affect user-initiated (manual) failovers. Syntax redundancy auto-failover-limit [count number [period minutes] | period minutes]] To disable the auto-failover limit control, enter no redundancy auto-failover-limit. Parameters count number period minutes Enter the number of times the RPMs can automatically failover within the period defined in the period parameter. Range: 2 to 10 Default: 3 Enter a duration in which to allow a number of automatic failovers (limited to the number defined in the count parameter). Range: 5 to 9000 minutes Default: 60 minutes Defaults Count: 3 Period: 60 minutes Command Modes CONFIGURATION Command History Version 8.1.1.0 Version 7.5.1.0 Version 7.6.1.0 Introduced on E-Series ExaScale Introduced on C-Series Introduced on E-Series Usage Information If auto failover is disabled, enter the redundancy auto-failover-limit (without any parameters) to set auto failover to the default parameters (Count 3, Period 60 minutes).Use the show redundancy command to view the redundancy status. When you change one or both of the optional parameters, FTOS checks that the interval between auto failovers is more than five (5) minutes. If the interval is less, FTOS returns a configuration error message. redundancy disable-auto-reboot c e Prevent the system from auto-rebooting the failed module. Syntax redundancy disable-auto-reboot [rpm| card number | all] To return to the default, enter no redundancy disable-auto-reboot rpm. Parameters rpm Enter the keyword rpm to disable auto-reboot of the failed RPM. Defaults Disabled (that is, the failed module is automatically rebooted). Command Modes CONFIGURATION High Availability (HA) | 537