Dell Force10 S25-01-GE-24V FTOS 8.4.2.6 Command Line Reference Guide for the E - Page 1445

Command Modes EXEC EXEC Privilege Command History Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.0 Support added for S-Series Support added for C-Series Introduced for E-Series Example Figure 60-7. show ntp status Command Example Force10#sh ntp status Clock is synchronized, stratum 2, reference is 100.10.10.10 frequency is -32.000 ppm, stability is 15.156 ppm, precision is 4294967290 reference time is BC242FD5.C7C5C000 (10:15:49.780 UTC Mon Jan 10 2000) clock offset is clock offset msec, root delay is 0.01656 sec root dispersion is 0.39694 sec, peer dispersion is peer dispersion msec peer mode is client Force10# Table 60-2. show ntp status Command Example Information Field "Clock is..." "frequency is..." "reference time is..." "clock offset is..." "root dispersion is..." "peer mode is..." Description States whether or not the switch clock is synchronized, which NTP stratum the system is assigned and the IP address of the NTP peer. Displays the frequency (in ppm), stability (in ppm) and precision (in Hertz) of the clock in this system. Displays the reference time stamp. Displays the system offset to the synchronized peer and the time delay on the path to the NTP root clock. Displays the root and path dispersion. State what NTP mode the switch is. This should be client mode. Related Commands show ntp associations Display information on NTP master and peer configurations. Time and Network Time Protocol (NTP) | 1445