Dell Force10 S25-01-GE-24V FTOS 8.4.2.6 Command Line Reference Guide for the E - Page 1610

www.dell.com | support.dell.com Parameters rpm linecard number port-set pipe-number egress errors | status | queues ingress errors | status | queues all errors | status | queues register starting-value [number_of_registers] Enter the keyword rpm to display RPM error counters, status registers, or packet queue from the BTM. Enter the keyword linecard followed by the line card slot number to display BTM error counters, status registers, or packet queue on the specified line card. Range: 0 to 13 on a E1200, 0 to 6 on a E600/E600i, and 0 to 5 on an E300 Enter the keyword port-set followed by the number of the line card's Port-Pipe. Range: 0 to 1 (OPTIONAL) Enter the keywords egress errors, egress status, or egress queues to view egress BTM error counters, status registers, or packet queue. (OPTIONAL) Enter the keywords ingress errors, ingress status, or ingress queues to view ingress BTM error counters, status registers, or packet queue. (OPTIONAL) Enter the keywords all errors, all status, or all queues to view all BTM error counters, status registers, or packet queue Enter the keyword register followed by the starting value of the register to read from. Range: 0 to 16777212 Optionally, enter the number of registers to read from. If no value is specified, only one line is displayed. Range: 1 to 512 Defaults No default behavior or values Command Modes EXEC EXEC Privilege Command History Example Version 6.5.4.0 Introduced Figure 67-19. show hardware linecard (E-Series) Command Example Force10#show hardware linecard 1 port-set 2 btm all errors Output for portpipe 0 Ingress PC_SPI4_BADPORT_CNTR [0x000230] = 16777216 PC_SPI4_EOP_ABORT_CNTR [0x000234] = 33554432 PC_SPI4_MISS_SOP_CNTR [0x00238] = 50331648 Output for portpipe 0 Egress FC_BAD_CRC_ERR_CNTR [0x000250] = 150994944 Force10# Related Commands clear hardware btm Clear the btm counters 1610 | E-Series Debugging and Diagnostics