Dell Force10 S25-01-GE-24V FTOS 8.4.2.6 Command Line Reference Guide for the E - Page 1629

cpu data-plane statistics cpu party-bus statistics stack-port 0-52 Enter the keywords cpu data-plane statistics to clear the data plane statistics. Enter the keywords cpu party-bus statistics to clear the management statistics. Enter the keyword stack-port followed by the port number of the stacking port to clear the statistics of the particular stacking port. Range: 0 to 52 Note: You can identify stack port numbers by physical inspection of the rear modules. The numbering is the same as for the 10G ports. You can also inspect the output of the show system stack-ports command. Defaults No default behavior or values Command Modes EXEC Privilege Command History Related Commands Version 7.8.1.0 show hardware stack-unit Introduced on S-Series Display the data plane or management plane input and output statistics of the designated component of the designated stack member. clear hardware system-flow s Clear system-flow statistics from selected hardware components. Syntax clear hardware system-flow layer2 stack-unit 0-7 port-set 0-1 counters Parameters stack-unit 0-7 port-set 0-1 counters Enter the keyword stack-unit followed by 0 to 7 to select a particular stack member and then enter one of the following command options to clear a specific collection of data. Enter the keyword port-set along with a port-pipe number, from 0 to 1, followed by the keyword counters to clear the system-flow counters on the selected port-pipe. Note: S25 models (S25N, S25P, S25V, etc.) have only port-pipe 0. Defaults No default behavior or values Command Modes EXEC Privilege Command History Related Commands Version 7.8.1.0 show hardware stack-unit Introduced on S-Series Display the data plane or management plane input and output statistics of the designated component of the designated stack member. hardware watchdog s Set the watchdog timer to trigger a reboot and restart the system. S-Series Debugging and Diagnostics | 1629