Dell Force10 S25-01-GE-24V FTOS 8.4.2.6 Command Line Reference Guide for the E - Page 1361
snmp-server community, snmp ifmib ifalias long Command Example, security-name, public
View all Dell Force10 S25-01-GE-24V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1361 highlights
Example Figure 55-5. snmp ifmib ifalias long Command Example !------command run on host connected to switch snmpwalk -c public 10.10.10.130 .1.3.6.1.2.1.31 | grep -i alias | more IF-MIB::ifAlias.134530304 = STRING: This is a port connected to Router2. This is a port connected to IF-MIB::ifAlias.134792448 = STRING: !------command run on Force10 switch Force10#snmp ifmib ifalias long !------command run on server connected to switch snmpwalk -c public 10.10.10.130 .1.3.6.1.2.1.31 | grep -i alias | more IF-MIB::ifAlias.134530304 = STRING: This is a port connected to Router2. This is a port connected to Router2. This is a port connected to Router2. This is a port connected to Router2. This is a port connected to Router2. IF-MIB::ifAlias.134792448 = STRING: snmp-server community c e s Configure a new community string access for SNMPv1, v2, and v3. Syntax snmp-server community community-name {ro | rw} [ipv6 ipv6-access-list-name [ipv6 ipv6-access-list-name | access-list-name | security-name name] | security-name name [ipv6 ipv6-access-list-name | access-list-name | security-name name] | access-list-name [ipv6 ipv6-access-list-name | access-list-name | security-name name]]] To remove access to a community, use the no snmp-server community community-string {ro | rw} [security-name name [access-list-name | ipv6 access-list-name | access-list-name ipv6 access-list-name]] command. Parameters community-name ro rw ipv6 access-list-name security-name name access-list-name Enter a text string (up to 20 characters long) to act as a password for SNMP. Enter the keyword ro to specify read-only permission. Enter the keyword rw to specify read-write permission. (Optional) Enter the keyword ipv6 followed by a an IPv6 ACL name (a string up to 16 characters long). (Optional) Enter the keyword security-name followed by the security name as defined by the community MIB. (Optional) Enter a standard IPv4 access list name (a string up to 16 characters long). Defaults No default behavior or values Command Modes CONFIGURATION Command History Version 7.6.1.0 Version 7.5.1.0 pre-Version. 6.2.1.1 Support added for S-Series Support added for C-Series Introduced on E-Series Usage The example below configures a community named public that is mapped to the security named Information guestuser with Read Only (ro) permissions. SNMP and Syslog | 1361