Dell Force10 S25-01-GE-24V FTOS 8.4.2.6 Command Line Reference Guide for the E - Page 93
module power-off
View all Dell Force10 S25-01-GE-24V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Command History Version 8.1.1.2 Introduced on E-Series ExaScale E600i Version 8.1.1.0 Introduced on E-Series ExaScale E1200i Version 7.5.1.0 Introduced on C-Series E-Series original Command Usage Information Use this command only for empty slots or a slot where you have hot-swapped a different line card type. Before inserting a card of a different type into the pre-configured slot, execute the no linecard number command. The following screenshot shows the current supported C-Series line cards, along with their "card types" (card-type IDs). Figure 5-6. Command Example: show linecard on Empty C300 Slot Force10#show linecard 3 -- Line card 11 -- Status : not present Force10#linecard 3 ? E46TB 36-port GE 10/100/1000Base-T with RJ45 - 8-port FE/GE with SFP - 2-port 10GE with SFP+ E46VB 36-port GE 10/100/1000Base-T with RJ45 and PoE - 8-port FE/GE with SFP - 2-port 10GE with SFP+ E48PB 48-port FE/GE line card with SFP optics (CB) E48TB 48-port GE 10/100/1000Base-T line card with RJ45 interfaces (CB) E48VB 48-port GE 10/100/1000Base-T line card with RJ45 interfaces and PoE (CB) EX4PB 4-port 10GE LAN PHY line card with XFP optics (CB) EX8PB 8-port 10GE LAN PHY line card with XFP optics (CB) Force10#linecard 3 EX4PB Force10#show linecard 3 -- Line card 11 -- Status : not present Required Type : EX4PB - 4-port 10GE LAN PHY line card with XFP optics (CB) Force10# Related Commands Note: It is advisable to shut down interfaces on a line card that you are hot-swapping. show linecard Display the line card(s) status. module power-off c e Turn off power to a line card at next reboot. Syntax module power-off linecard number Parameters linecard number Enter the keyword line card followed by the line card slot number C-Series Range: 0-7 E-Series Range: 0 to 13 on a E1200/1200i, 0 to 6 on a E600/E600i, and 0 to 5 on a E300. Defaults Not configured. Command Modes CONFIGURATION Control and Monitoring | 93