Dell Force10 S55T S55 Configuration Guide FTOS 8.3.5.3 - Page 682

www.dell.com | support.dell.com Task Command Figure 38-4. Reading the Value of Many Managed Objects at Once > snmpwalk -v 2c -c mycommunity 10.11.131.161 .1.3.6.1.2.1.1 SNMPv2-MIB::sysDescr.0 = STRING: Force10 Networks Real Time Operating System Software Force10 Operating System Version: 1.0 Force10 Application Software Version: E_MAIN4.7.6.350 Copyright (c) 1999-2007 by Force10 Networks, Inc. Build Time: Mon May 12 14:02:22 PDT 2008 SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.6027.1.3.1 DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (32920954) 3 days, 19:26:49.54 SNMPv2-MIB::sysContact.0 = STRING: SNMPv2-MIB::sysName.0 = STRING: S50V_7.7 SNMPv2-MIB::sysLocation.0 = STRING: SNMPv2-MIB::sysServices.0 = INTEGER: 4 Write Managed Object Values You may only alter (write) a managed object value if your management station is a member of the same community as the SNMP agent, and the object is writable. To write or write-over the value of a managed object: Task To write or write-over the value of a managed object, as shown in Figure 38-5. Command snmpset -v version -c community agent-ip {identifier.instance | descriptor.instance} Figure 38-5. Writing over the Current Value of a Managed Object > snmpset -v 2c -c mycommunity 10.11.131.161 sysName.0 s "R5" SNMPv2-MIB::sysName.0 = STRING: R5 Configure Contact and Location Information using SNMP You may configure system contact and location information from the Dell Force10 system or from the management station using SNMP. To configure system contact and location information from the Dell Force10 system: Task Command Identify the system manager along with this person's contact information (e.g E-mail address or phone number). You may use up to 55 characters. Default: None snmp-server contact text Command Mode CONFIGURATION 682 | Simple Network Management Protocol