Dell Force10 S55T S55 Configuration Guide FTOS 8.3.5.3 - Page 683

Task Command Identify the physical location of the system. For example, San Jose, 350 Holger Way, 1st floor lab, rack A1-1. You may use up to 55 characters. Default: None snmp-server location text Command Mode CONFIGURATION To configure the system from the manumitting station using SNMP: Task Command Command Mode Identify the system manager along with this person's contact information (e.g E-mail address or phone number). You may use up to 55 characters. Default: None Identify the physical location of the system. For example, San Jose, 350 Holger Way, 1st floor lab, rack A1-1. You may use up to 55 characters. Default: None snmpset -v version -c community agent-ip sysContact.0 s "contact-info" snmpset -v version -c community agent-ip sysLocation.0 s "location-info" CONFIGURATION CONFIGURATION Subscribe to Managed Object Value Updates using SNMP By default, the Dell Force10 system displays some unsolicited SNMP messages (traps) upon certain events and conditions. You can also configure the system to send the traps to a management station. Traps cannot be saved on the system. FTOS supports the following three sets of traps: • RFC 1157-defined traps: coldStart, warmStart, linkDown, linkUp, authenticationFailure, egpNeighbborLoss • Dell Force10 enterpriseSpecific environment traps: fan, supply, temperature • Dell Force10 enterpriseSpecific protocol traps: bgp, ecfm, stp, xstp, To configure the system to send SNMP notifications: Step Task 1 Configure the Dell Force10 system send notifications to an SNMP server. Command snmp-server host ip-address Command Mode CONFIGURATION Simple Network Management Protocol | 683