Dell Inspiron One 2205 Service Manual - Page 39

Back to Contents Page Middle Frame Dell™ Inspiron™ One 2205 Service Manual Removing the Middle Frame Replacing the Middle Frame WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer). Removing the Middle Frame 1. Follow the instructions in Before You Begin. 2. Remove the back cover (see Removing the Back Cover). 3. Follow the instructions from step 3 to step 5 in Removing the Optical Drive. 4. Follow the instructions from step 3 to step 7 in Removing the Front Stand. 5. Remove the rear stand cover (see Removing the Rear Stand Cover). 6. Remove the system-board shield (see Removing the System-Board Shield). 7. Disconnect the speaker cable from the connector (CN10) on the system board. 8. Make a note of the speaker cable routing and remove the cable from the routing guides. 9. Remove the cables from the routing guides on the middle frame. 10. Remove the 13 screws that secure the middle frame to the chassis. 11. Lift the middle frame at an angle toward the side of the computer and out of the chassis. 12. Remove the speaker (see Removing the Speakers). 1 middle frame 3 screws (13) 2 routing guide Replacing the Middle Frame