Dell Inspiron One 2205 Service Manual - Page 47

Processor - processor socket

Page 47 highlights

Back to Contents Page Processor Dell™ Inspiron™ One 2205 Service Manual Removing the Processor Replacing the Processor WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer). Removing the Processor 1. Follow the instructions in Before You Begin. 2. Remove the back cover (see Removing the Back Cover). 3. Follow the instructions from step 3 to step 7 in Removing the Front Stand. 4. Remove the rear stand cover (see Removing the Rear Stand Cover). 5. Remove the system-board shield (see Removing the System-Board Shield). 6. Remove the MXM-assembly fan (see Removing the MXM-Assembly Fan). 7. Remove the MXM assembly (see Removing the MXM Assembly). 8. Remove the processor heat-sink fan (see Removing the Processor Heat-Sink Fan). 9. Remove the processor heat-sink (see Removing the Processor Heat-Sink). 10. Press and push the release lever down and out to release it from the tab that secures it. 1 processor 3 processor socket 2 release lever CAUTION: When removing or replacing the processor, do not touch any of the pins inside the processor socket or allow any objects to fall on the pins in the processor socket.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74

Back to Contents Page
Processor
Dell™ Inspiron™ One 2205 Service Manual
Removing the Processor
Replacing the Processor
Removing the Processor
1.
Follow the instructions in
Before You Begin
.
2.
Remove the back cover (see
Removing the Back Cover
).
3.
Follow the instructions from
step 3
to
step 7
in
Removing the Front Stand
.
4.
Remove the rear stand cover (see
Removing the Rear Stand Cover
).
5.
Remove the system-board shield (see
Removing the System
-
Board Shield
).
6.
Remove the MXM-assembly fan (see
Removing the MXM
-
Assembly Fan
).
7.
Remove the MXM assembly (see
Removing the MXM Assembly
).
8.
Remove the processor heat-sink fan (see
Removing the Processor Heat
-
Sink Fan
).
9.
Remove the processor heat-sink (see
Removing the Processor Heat
-
Sink
).
10.
Press and push the release lever down and out to release it from the tab that secures it.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
1
processor
2
release lever
3
processor socket
CAUTION:
When removing or replacing the processor, do not touch any of the pins inside the processor socket or allow any objects to fall on the
pins in the processor socket.