Dell Latitude X300 User Guide - Page 98

Adding a Mini PCI Card

Get Dell Latitude X300 PDF manuals and user guides View all Dell Latitude X300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 98 highlights

1 captive screw (2) 2 cover 8. If a modem is not already installed, go to step 11. If you are replacing a modem, remove the existing modem: a. Remove the screw securing the modem to the system board, and set it aside. b. Pull straight up on the attached pull-tab to lift the modem out of its connector on the system board, and disconnect the modem cable. 1 modem cable-connector 2 modem 3 modem screw 4 system board connector 9. Connect the modem cable to the modem. NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card. 10. Align the modem with the screw hole and press the modem into the connector on the system board. 11. Install the screw to secure the modem to the system board. 12. Replace the cover. Adding a Mini PCI Card

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
8.
If a modem is not already installed, go to
step 1
1. If you are replacing a modem, remove the existing modem:
a.
Remove the screw securing the modem to the system board, and set it aside.
b.
Pull straight up on the attached pull-tab to lift the modem out of its connector on the system board, and disconnect the modem cable.
9.
Connect the modem cable to the modem.
10.
Align the modem with the screw hole and press the modem into the connector on the system board.
11.
Install the screw to secure the modem to the system board.
12.
Replace the cover.
Adding a Mini PCI Card
1
captive screw (2)
2
cover
1
modem cable-connector
2
modem
3
modem screw
4
system board connector
NOTICE:
The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card.