Denon CDR-1000 Owners Manual - Page 17

ENGLISH NOTES: • If there are no discs in the memory, the message "MEMORY EMPTY" appears on the display. • It is not possible to check or erase the text of a disc that has been finalized. When the disc is finalized, the text stored in the memory of this unit is moved to the disc. • When the text memory of your CD recorder is full, the message "MEMORY FULL" will appear, followed by "FINALIZE CD". If you want to add a CD to the list of discs for which text is stored, you have to erase a disc from this list or finalize another disc. ("for which text is stored") • "MEMORY FULL/FINALIZE CD" may also appear when unfinalizing a CD-RW disc for which text was stored (see 'Unfinalizing CD-RW discs'). The same action(s) should be taken in order to obtain memory space. Recording Settings 5 The recording setting mode permits the setting of fade recording, the auto track function, and recording balance. 5 Details of the recording settings are stored in this unit. The next time a recording is made, it can be made with the same settings. To use different settings, change those settings when required. ✽ Note that settings details are not stored only for the recording balance setting mode. Make settings as required. Fade SET FADE 5 This unit permits fade-in recording, where the recording level gradually increases from the start of the recording, as well as fade-out recording, where the recording level gradually decreases from the where the STOP button (2) was pressed and the recording ends, or from where the PLAY/PAUSE button (1/3) or the PAUSE button (3) on the remote control was pressed and the recording was paused. 9 B PCM AUDIO TECHNOLOGY/ CD RECORDER CDR-1000 ¢ ON / STANDBY £ OFF PHONES PHONES LEVEL MIN MAX STANDBY REMOTE SENSOR REM REC TIME 1 2 3 4 5 6 7 8 9 10 11 OPTICAL I L CD RW R TRACK TIME MANUAL SYNC OPEN /CLOSE DISPLAY SCROLL PLAY /PAUSE / STOP REC MODE REC REPEAT PROGRAM INPUT ERASE SHUFFLE STORE / MENU MULTI JOG - + CANCEL / DELETE FINALIZE ENTER 1,8 SCAN ON /STANDBY REPEAT PROGRAM SHUFFLE ABC 1 JKL 4 RST 7 TRACK MARK DEF 2 GHI 3 MN 5 OPQ 6 UVW 8 XYZ 9 SPACE SCROLL 0 PLAY STOP PAUSE STORE / MENU ENTER CANCEL/ DELETE REMOTE CONTROL UNIT RC-276 1,8 1~7 8 2,4,6 1 Select the SET FADE submenu. • "SET FADE" appears on the display. 2 Press the ENTER button to confirm. • "FADE ON/OFF" appears on the display. 3 Press the ENTER button and turn the MULTI JOG dial to select "ON" or "OFF". 4 Press the ENTER button to confirm. • "FADE ON/OFF" appears on the display again. 5 Turn the MULTI JOG dial to select "SET FADE IN" or "SET FADE OUT". 6 Press the ENTER button to confirm. • The currently set fade time is displayed. 1 Select the AUTO TRACK submenu. • "AUTO TRACK" appears on the display. 7 By turning the MULTI JOG dial you can set the FADE IN or FADE OUT time. • The fade time can be adjusted from 0 to 10 seconds in 0.05 second increments. It will be displayed in the form of "0 MS ~ 0000 MS". • FADE IN automatically starts when you press RECORD to start recording. Your recording will automatically be faded out when you press the STOP button (2) or the PLAY/PAUSE button (1/3) or the PAUSE button (3) on the remote control. 8 Press the STORE/MENU button to store settings and return to the submenu or STOP button (2) to exit. 2 Press the ENTER button to confirm. 3 Select the Auto track "ON" or "OFF". 4 Press the ENTER button to confirm. • When "ON" is selected, track numbers will be automatically incremented during recording. • When "OFF" is selected, you can number the recorded tracks yourself. (Press the TRACK MARK button on the remote control.) 5 Press the STORE/MENU button to store settings and return to the submenu or STOP button (2) to exit. NOTES: • Fade-in and Fade-out will not function in Synchro- recording mode. However, the sound fades out if the STOP button (2) or the PAUSE button (3) is pressed during synchronized recording. • Use manual recording when performing fade-in recording. Auto track increment AUTO TRACK 5 The auto track function setting can be switched in the manual recording mode. It is also possible to give track numbers manually as you record. 5 The operation conditions of the auto track function will differ depending on the input source. For details, see "Track Numbers" on Page 6. 5 The set mode is stored and this allows the set information to also be used the next time a recording is made. 5 NOTES: • In the Autostart recording mode, the track number cannot be associated manually. • In the Autostart recording mode, the auto track function is automatically activated regardless of whether the auto track mode is set ON or OFF. • The track number cannot be changed after the recording. • The track number cannot be changed for 4 seconds following the last change. (See "Restrictions in Recording with this Unit" on Page 7.) B PCM AUDIO TECHNOLOGY/ CD RECORDER CDR-1000 ¢ ON / STANDBY £ OFF PHONES PHONES LEVEL MIN MAX STANDBY REMOTE SENSOR REM REC TIME 1 2 3 4 5 6 7 8 9 10 11 OPTICAL I L CD RW R TRACK TIME MANUAL SYNC OPEN /CLOSE DISPLAY SCROLL PLAY /PAUSE / STOP REC MODE REC REPEAT PROGRAM INPUT ERASE SHUFFLE STORE / MENU MULTI JOG - + CANCEL / DELETE FINALIZE ENTER 1 1,5 SCAN ON /STANDBY REPEAT PROGRAM SHUFFLE ABC 1 JKL 4 RST 7 TRACK MARK DEF 2 GHI 3 MN 5 OPQ 6 UVW 8 XYZ 9 SPACE SCROLL 0 PLAY STOP PAUSE STORE / MENU CANCEL/ ENTER DELETE REMOTE CONTROL UNIT RC-276 1,5 1~4 2,4 17