Electrolux EDW5505E Service Manual - Page 10

Electrolux EFS - Dishwashing Systems Platform Electrolux Professional Electronic Dishwasher SERVICE MANUAL To modify thresholds do the following: • Switch OFF and switch ON the dishwasher; • Enter into the FACTORY SETTING mode by pressing and hold down ON/OFF and CYCLE_2 keys for at least five seconds (Fig.5.1); • Press CYCLE INFINITE. The display shows alternatively the symbol bt°C (Fig.5.2) and the corresponding value 76 (Fig.5.3); • Use CYCLE_1 key to decrease the value and CYCLE_2 key to increase (Fig.4.3); • Press CYCLE INFITE key to confirm. The display shows the next parameter (Fig.4.4) and the corresponding value (Fig.4.5); • In the same way is possible to change the other parameters; when finished switch OFF and switch ON. FAC bt°C Fig. 5.1 Factory setting mode Fig. 5.2 Boiler temp. threshold 76 ª © Fig. 5.3 Change value & Store btH Fig. 5.4 Boiler Temp Hysteresis 2 ª © Fig. 5.5 Change value & Store bHi Fig. 5.6 Tank temp. High limit. 96 ª © Fig. 5.7 Change value & Store bLo At the end the display will show again 'FAC' and by pressing CYCLE_2 key (Fig.4.9) is possible to change cycle duration (see next paragraph). FAC FAC CY1 Fig. 5.9 Factory setting mode Fig. 5.10 Next Family Fig. 5.11 Cycle 1 Family: ENTER DOC. NO. 5956.446.06 ©Copyright 2005 by Electrolux Professional P.10/88