Electrolux EDW5505E Service Manual - Page 63

Electrolux EFS - Dishwashing Systems Platform Electrolux Professional Electronic Dishwasher SERVICE MANUAL WT38PM50 / WT38PM60 Prog. 039 1. Switch OFF and then switch ON the machine. 2. CFG Enter into CFG parameter family and set the following parameters. tYP boi doo dFL trc b_t btF LES UI rE ALr 0 1 2 3 0 1 75 0 8 0 1 Hood Type like working cycles. Pressure boiler. Front loading. Default values for Undercounter models. (for this appliance SOFT START is NOT possible). Tank heater works only if boiler temperature reached. Enable filling tank by means of rinsing cycles. Detergent level switches not enabled. ACTIVE function disabled (up to version 3.11 set to 0). Regeneration cycle disabled. Alarms enabled. 3. Switch OFF and then switch ON the machine. 4. Modify Factory parameters: FAC Enter into FAC parameter family and change boiler threshold. bt°C btd 90 10 Boiler Temperature Threshold. During stand-by boiler is kept at lower temperature than Temperature Threshold. bSt tt°C tHi 0 66 85 Booster Function not necessary. Tank Temperature Threshold. High limit for tank temperature. 5. Modify the cycle parameters: CY1 Cycle 1 parameters family. Ln1 Sh1 ri1 dr1 1 Long Wash Phase [min] 22 Short Wash Phase [s] 25 Rinse Phase Duration [s] 40 Drain [s] FP1 4 Final Pause [s] CY2 Cycle 2 parameters family. Ln2 Sh2 ri2 dr2 FP2 2 22 25 40 4 Long Wash Phase [min] Short Wash Phase [s] Rinse Phase Duration [s] Drain [s] Final Pause [s] CY3 Cycle 3 parameters family. Ln3 Sh3 ri3 dr3 FP3 4 22 25 40 4 Long Wash Phase [min] Short Wash Phase [s] Rinse Phase Duration [s] Drain [s] Final Pause [s] DOC. NO. 5956.446.06 ©Copyright 2005 by Electrolux Professional P.63/88