Electrolux EDW5505E Service Manual - Page 57
WT30M, Prog. 034
View all Electrolux EDW5505E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Electrolux EFS - Dishwashing Systems Platform Electrolux Professional Electronic Dishwasher SERVICE MANUAL WT30M Prog. 034 1. Switch OFF and then switch ON the machine. 2. CFG Enter into CFG parameter family and set the following parameters. tYP 3 Medical line dishwasher with lock door/hood device. boi 0 Atmospheric boiler. doo 1 Manual Hood. dFL 1 Default values for Hood Type models. trc 0 (for this appliance SOFT START is NOT possible). b_t 1 Tank heater works only if boiler temperature reached. btF 75 Enable filling tank by means of rinsing cycles. LES 0 Detergent level switches not enabled. UI 8 ACTIVE function disabled (up to version 3.11 set to 0). rE 0 Regeneration cycle disabled. ALr 1 Alarms enabled. 3. Switch OFF and then switch ON the machine. 4. Modify Factory parameters: FAC Enter into FAC parameter family and change boiler threshold. bt°C 92 Boiler Temperature Threshold. bHi 0 Disable boiler high Temperature alarm ( C 2 ). bAJ 0 Boiler Temperature Adjust. bSt 0 Booster function not needed. btd 10 During stand-by boiler is kept at lower temperature than Temperature Threshold. tt°C 65 Tub Temperature Threshold. tHi 85 Tank high Temperature limit. 5. Modify the cycle parameters: CY1 Cycle 1 parameters family. Ln1 3 Long Wash Phase [min] Sh1 35 Short Wash Phase [s] pAI 5 Pause [s] ri1 35 Rinse Phase Duration [s] dr1 40 Drain [s] FP1 60 Final Pause at End of Cycle [s]. CY2 Cycle 2 parameters family. Ln2 6 Long Wash Phase [min] Sh2 35 Short Wash Phase [s] pA2 5 Pause [s] ri2 35 Rinse Phase Duration [s] dr2 40 Drain [s] FP2 60 Final Pause at End of Cycle[s]. DOC. NO. 5956.446.06 ©Copyright 2005 by Electrolux Professional P.57/88