Garmin Geko 301 Owner's Manual - Page 49

Units

Page 49 highlights

Using the Geko 301 with a paper map increases the navigation capabilities of each. To use a map in conjunction with the Geko 301, you must select the position format, map datum, map units, and north reference to match the map. The Geko 301 supports both the UTM/UPS and latitude/longitude grids, which define position location for the entire globe. Position Format The default position format (and the one most commonly used) for the Geko 301 is latitude and longitude in degrees and minutes (hdddº mm.mmm'). Choose from 11 other position formats or choose the 'User' position format to approximate custom-designed grids. For more information on map datum and grids we recommend you visit the National Imagery and Mapping Agency at http://www.nima.mil. To change the Position Format (grid): 1. From the UNITS Page press the UP or DOWN Button to highlight the 'POSITION FRMT' field and press the OK Button. 2. Press the UP or DOWN Button to highlight the desired format and press the OK Button. 3. Press the PAGE Button to return to the MENU Page. Map Datums A map datum is a reference model of the Earth's shape. Every map uses a map datum which is usually listed in the title block of the map. The default datum in the Geko 301 is WGS 84 (World Geodetic Survey, 1984). You should only change the datum if you are using maps or charts that specify a different datum. Choose the 'User' datum if using a map with custom-designed grids. Using this setting requires an advanced knowledge of map datums. Setup Page Units Units Option Units Menu The default datum is WGS 84 although Data Entry Pages exist for the User Grid Position Format and the User Map Datum Setup. 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68

37
Setup Page
Units
Using the Geko 301 with a paper map increases the navigation capabilities of each. To
use a map in conjunction with the Geko 301, you must select the position format, map
datum, map units, and north reference to match the map. The Geko 301 supports both the
UTM/UPS and latitude/longitude grids, which define position location for the entire globe.
Position For
mat
The default position format (and the one most commonly used) for the Geko 301 is
latitude and longitude in degrees and minutes (hdddº mm.mmm’). Choose from 11 other
position formats or choose the ‘User’ position format to approximate custom-designed
grids. For more information on map datum and grids we recommend you visit the National
Imagery and Mapping Agency at http://www.nima.mil.
To change the Position Format (grid):
1.
From the UNITS Page press the
UP
or
DOWN
Button to highlight the ‘POSITION FRMT’
field and press the
OK
Button.
2.
Press the
UP
or
DOWN
Button to highlight the desired format and press the
OK
Button.
3.
Press the
PAGE
Button to return to the MENU Page.
Map Datums
A map datum is a reference model of the Earth’s shape. Every map uses a map datum
which is usually listed in the title block of the map. The default datum in the Geko 301 is
WGS 84 (World Geodetic Survey, 1984). You should only change the datum if you are using
maps or charts that specify a different datum. Choose the ‘User’ datum if using a map with
custom-designed grids. Using this setting requires an advanced knowledge of map datums.
The default datum is WGS
84 although Data Entry
Pages exist for the User Grid
Position Format and the User
Map Datum Setup.
Units Option
Units Menu