Gateway MX6650 8511226 - Gateway Platinum Edition User Guide - Page 100

Chapter 8: Troubleshooting ■ Change the display settings. Tips & Tricks For instructions on changing the display settings, see "Adjusting the screen and desktop settings" in Using Your Computer which has been included on your hard drive. To access this guide, click Start, All Programs, then click Gateway Documentation. ■ Move your notebook away from sources of electrical interference, such as televisions, unshielded speakers, microwaves, fluorescent lights, and metal beams or shelves. The display has pixels that are always dark or too bright This condition is normal and inherent in the TFT technology used in active-matrix LCD screens. Gateway's inspection standards keep these to a minimum. If you feel these pixels are unacceptably numerous or dense on your display, contact Gateway Customer Care to identify whether a repair or replacement is justified based on the number of pixels affected. The display is blank ■ Adjust the brightness using the system keys. For more information, see "System key combinations" on page 31. ■ Make sure the notebook is not in standby or hibernate mode. For more information, see "Changing power modes" on page 59. ■ The notebook may be sending its display to an external monitor or projector. Press FN + F4 several times to toggle through the attached display, an external monitor or projector, or both. DVD drives Your notebook does not recognize a disc ■ The disc may not be seated correctly in the tray. When you place a disc on the tray, make sure that you press the disc firmly onto the spindle so the retainers hold the disc in place. ■ Make sure that the disc label is facing up, then try again. ■ Try a different disc. Occasionally discs are flawed and cannot be read by the drive. 94 www.gateway.com