Haier 3U19FS1ERA Service Manual - Page 60
Liquid Pipe 6.35mm
View all Haier 3U19FS1ERA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
3. PIPING CONNECTION >_]]VbTZR\ _^UZdZ_^Vb Fit the nut on and fasten The maximum length and drop height of connecting pipe 90 0.5O Please refer to the installation manual of outdoor unit Joint To ensure the efficiency , Pipes shall be as short as possible. Spanner Cautions for piping connection Do not twist or deform the connecting pipe. Do not mix dusts. The bending radius shall be as large as possible. Both gas pipe and liquid pipe shall be heat insulation. No leakage in the flare. Piping connection Connecting method Spanner Diameter of Pipe Liquid Pipe 6.35mm Gas Pipe 12.7mm Nut Tighten Torque (N. m) 11.8 49.0 Smear refrigerant oil on the joints of piping and flare. The bending radius shall be as large as possible. Align the pipe center when fastening, and tighten the nut, as shown in the figure. Pay attention to not mix foreign matters such as sands in. If not aligned ,tighten the nut by force will damage the nut that result in gas leakage -59-