HP 1050c HP DesignJet 1000 Series Take-Up Reel UserÂ’s Guide - C60 - Page 21
Loading Paper on to the Take-Up Reel - designjet user s guide
View all HP 1050c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Loading Paper on to the Take-Up Reel CAUTION CAUTION Before using the take-up reel, ensure that it has been properly installed (see preceding pages). In particular, the core tube should be mounted on the spindle. HP Bright White Inkjet Paper is available in 150-ft and 300-ft rolls. The takeup reel can only completely roll up 150-ft rolls. Backlit paper with a separate slip sheet is not recommended for use with the take-up reel. s If you already have a roll of paper in the printer, go to the front panel and select the Roll Paper menu. Set the "TUR loaded" option to Yes. Now go to step 1 below. s If you do not already have a roll of paper in the printer, load the roll according to the instructions in Chapter 3 of the User's Guide. Soon after you have selected the paper type, the front panel will offer the option "Load Take-Up Reel (TUR)", which can be set to No or Yes. Select Yes. Continue with step 1 below. 1 The front panel will prompt you to move the paper using the arrow keys. Use the ↓ key to move the leading edge of the paper down until it is level with the centre of the core tube. Make sure the paper passes in front of the deflector, as shown below. If you move the paper too far by mistake, use the ↑ key to move the paper back up. 21 HP DesignJet 1000 Series Take-Up Reel