HP 1050c HP DesignJet 1000 Series Take-Up Reel UserÂ’s Guide - C60 - Page 25
key on the front panel to advance the paper. Enough paper should
View all HP 1050c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
7 Use a small amount of sticky tape to attach the paper to the core. Use three strips, one in the middle (first) and then one at each side of the paper. NOTE: Use only tape that will not tear the paper when it is removed later. NOTE: To avoid the paper skewing as it is wound onto the core tube, ensure the paper is straight when it is attached. 8 Press the ↓ key on the front panel to advance the paper. Enough paper should be advanced so that the paper can wrap at least once around the core. Advance about this much paper 25 HP DesignJet 1000 Series Take-Up Reel
25
HP DesignJet 1000 Series Take-Up Reel
7
Use a small amount of sticky tape to attach the paper to the core. Use three strips,
one in the middle (first) and then one at each side of the paper.
NOTE:
Use only tape that will not tear the paper when it is removed later.
NOTE:
To avoid the paper skewing as it is wound onto the core tube, ensure the
paper is straight when it is attached.
8
Press the
↓
key on the front panel to advance the paper. Enough paper should be
advanced so that the paper can wrap at least once around the core.
Advance about this
much paper