HP 4300n HP LaserJet 4200 and 4300 series printer - User Guide - Page 93
Performing preventative maintenance, To reset the maintenance-kit counter - fuser kit
UPC - 808736314381
View all HP 4300n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Performing preventative maintenance Note Note You should replace certain parts when the PERFORM PRINTER MAINTENANCE message appears on the printer control panel display. This will help ensure that your printer maintains optimum performance. The maintenance message will appear every 200,000 pages. The message can be temporarily cleared for approximately 10,000 pages using the CLEAR MAINTENANCE MESSAGE item on the Resets submenu. (See "CLEAR MAINTENANCE MESSAGE" on page 166.) To check the number of pages the printer has printed since new maintenance-kit components were installed, print either a configuration page or a supplies status page. (See "Configuration page" on page 83 or "Supplies status page" on page 85 for details.) To order the printer maintenance kit, see "Ordering information" on page 17. The kit includes: fuser rollers (transfer, pickup, and feed) installation instructions The printer maintenance kit is a consumable item and is not covered under the original printer warranty or under most extended warranties. After a maintenance kit is installed, the maintenance-kit counter must be reset. To reset the maintenance-kit counter 1 Turn the printer power off. 2 Hold down SELECT ( ), and then turn the printer power on. Continue holding down SELECT ( ) until all three printer control panel lights flash once, and then remain on. This might take up to 10 seconds. 3 Press UP ARROW ( ) to scroll to NEW MAINTENANCE KIT. 4 Press SELECT ( ) to reset the maintenance-kit counter. Perform this procedure only after a maintenance kit has been installed. Do not use this procedure to temporarily clear the PERFORM PRINTER MAINTENANCE message. ENWW Performing preventative maintenance 91