HP BL10e HP ProLiant BL e-Class System Setup and Installation Guide - Page 111
Table D-4, Is the Enclosure Power LED on the Rear Panel Green
UPC - 808736933599
View all HP BL10e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Troubleshooting Table D-4: Is the Enclosure Power LED on the Rear Panel Green? Answer No, it is off. No, it is amber. Yes, it is green. Possible Reasons The cable is not properly connected between the fan backplane and the power backplane. The interconnect tray is not fully inserted. The Integrated Administrator module is not properly seated. The fan backplane assembly has failed. The connector on the power backplane is damaged. The power backplane has failed. The enclosure is in standby mode. Possible Solutions Be sure that the connectors on the fan cable are properly seated and not damaged. Remove and reseat the interconnect tray. Contact HP or an authorized service provider for parts and service. Push the enclosure power button on the fan cage at the rear of the enclosure. Caution: Pressing the enclosure power button while the enclosure is running shuts down the enclosure and all server blades. If the enclosure power LED is green, go to table D-5. HP ProLiant BL e-Class System Setup and Installation Guide D-9