HP BL10e HP ProLiant BL e-Class System Setup and Installation Guide - Page 44
Measuring with the Rack Template
UPC - 808736933599
View all HP BL10e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Installing and Cabling the System Measuring with the Rack Template Using the rack template, identify the proper holes for inserting the tabs on the vertical rack supports. Use a pencil to mark the top and bottom edges for the rack supports on the rack template, which identify the position for the rails supporting the enclosure. To use the rack template to identify the required space and location for the enclosure: 1. Stand at the front of the rack and identify the front side of the rack template. 2. Starting at the top of the last item installed, secure the rack template against the front of the rack by sliding the two push tabs into the holes in the rack supports. WARNING: Racks must be adequately stabilized before and after product installation. If you are installing an enclosure into an empty rack, you must install the enclosure at the bottom of the rack and work your way up with additional enclosures as needed. IMPORTANT: Match the hole pattern on the rack template with the holes in the rack supports. Figure 3-5: Measuring with the ProLiant BL e-Class rack template 3-6 HP ProLiant BL e-Class System Setup and Installation Guide