HP C8907A User Guide - Page 47
Enter the WEP passkey on your HP Wireless Dock Base., Verification fails at end of installation
UPC - 829160417196
View all HP C8907A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Solution Use the Wireless Setup Wizard to either create or select a new network name (SSID). Verification fails at end of installation Cause You might not have the correct wireless authentication or encryption type selected. You might be using an unsupported authentication or encryption type. Solution Add encryption security to your network. For more information, see . Add encryption security to your network. To add WEP encryption to your network Note You will lose connection to the HP Wireless Dock Base until the encryption/authentication settings are applied to the rest of the nodes on the network. 1. Set up WEP on your wireless access point, gateway, or router. 2. Set up WEP on any wireless computer that will be on the same wireless network. 3. Enter the WEP passkey on your HP Wireless Dock Base. Cause Your network name (SSID) or WEP key might be incorrectly set. Solution You can use the Wireless Setup Wizard to change the SSID or WEP. For information, see Connecting to your wireless network. Cause You are using an authentication protocol not supported by the installation software. Solution Use one of the supported protocol types listed in the Embedded Web Server. Types not supported include: WPA2-AES, WPA2-TKIP, LEAP, PEAP, EAP-MD5, EAP-TLS, EAP-AES, or EAP-TTLS. Cause Your network uses multiple WEP keys, and you have chosen the wrong key for transmitting. Solution Enter the correct WEP key. For more information, see Connecting to your wireless network. Setup failed Cause No signal is being received by the HP Wireless Dock Base. Solution In order to establish a good signal between the HP Wireless Dock Base and access point (infrastructure) or computer (ad-hoc), you might have to User Guide 47