HP DeskJet Ink Advantage 2600 User Guide - Page 103
Control panel error codes and status, Number of copies
View all HP DeskJet Ink Advantage 2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Control panel error codes and status Control panel error codes ● If the Number of copies icon on the printer display changes to a number, blinking together with the letter E at the left side, it indicates the printer is in an error state. The letter E and the number work as error codes. Light behavior The letter E and the number 1 are blinking. At the same time, the Resume light is blinking. Cause and Solution The printer receives a printing job, starts feeding paper, and detects that the paper width for the printing job is bigger than the width of the loaded paper. Press either the Resume button ( ) or the Cancel button ( ) to cancel the printing job and eject paper. The letter E and the number 2 are blinking. At the same time, the Resume light is blinking. To avoid the paper size mismatch problem, do one of the following before printing. - Change the paper size setting for the printing job to match the paper loaded. - Remove all paper from the input tray, and then load paper that matches the paper size setting for the printing job. TIP: You can change the default paper size automatically detected by the printer. For more information, see Change the default paper size detected by printer on page 15. The printer receives a multipage printing job, detects that the paper length for the printing job does not match the length of the loaded paper, and then prints out the first page of the job with errors. - To cancel the printing job, press the Cancel button ( ). The letter E and the number 3 are blinking. At the same time, the Resume light and the Ink Alert light are blinking. - To continue printing the remaining pages, press the Resume button ( ). The remaining pages will have the same errors as the first page. TIP: You can change the default paper size automatically detected by the printer. For more information, see Change the default paper size detected by printer on page 15. The carriage inside the printer has stalled. Open the cartridge access door and make sure the carriage is not obstructed. Move the carriage to the right, close the cartridge access door, and then press the Resume button ( ) to continue printing. See Jams and paper-feed issues on page 76 for more information. ENWW Control panel error codes and status 97