HP LaserJet Pro 300 HP LaserJet Pro 300 and 400 Color M351 and M451 - User Gui - Page 30

System Setup menu In the following table, items that have asterisks (*) indicate the factory default setting. Menu item Language Paper Setup Print Quality Sub-menu item Sub-menu item Sub-menu item Def. Paper Size Letter A4 Legal Def. Paper Type A list of available paper types appears. Tray 1 Paper Type Paper Size Tray 2 Paper Type Paper Size Paper Out Action Wait Forever* Cancel Override Calibrate Color After Power On Calibrate Now Description Select the language for the control panel display messages and the product reports. Select the size for printing internal reports or any print job that does not specify a size. Select the paper type for printing internal reports or any print job that does not specify a type. Select the default size and type for Tray 1 from the list of available sizes and types. Select the default size and type for Tray 2 from the list of available sizes and types. Select how the product should react when a print job requires a size or type that is not available or when a specified tray is empty. Select the Wait Forever option to make the product wait until you load the correct paper and press the OK button. This is the default setting. Select the Override option to print on a different size or type after a specified delay. Select the Cancel option to automatically cancel the print job after a specified delay. If you select either the Override or Cancel options, the control panel prompts you to specify the number of seconds to delay. Use the arrow buttons to increase or decrease the time. After Power On: Select how soon the product should calibrate after you turn it on. The default setting is 15 Minutes. Calibrate Now: Makes the product perform a calibration immediately. If a job is processing, the product calibrates after the job is complete. If an error message displays, you must clear the error first. 12 Chapter 2 Control panel menus ENWW