HP LaserJet Pro 300 HP LaserJet Pro 300 and 400 Color M351 and M451 - User Gui - Page 47
Install software for Mac computers on a wired network, Con the IP address, Install the software
View all HP LaserJet Pro 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Install software for Mac computers on a wired network Configure the IP address 1. Connect the network cable to the product and to the network. 2. Wait for 60 seconds before continuing. During this time, the network recognizes the product and assigns an IP address or host name for the product. Install the software 1. Install the software from the CD. Click the product icon, and follow the onscreen instructions. 2. Print a page from any program to make sure that the software is correctly installed. Install software for Mac computers on a wireless network Before installing the product software, make sure the product is not connected to the network using a network cable. Make sure your Mac computer is connected to the same wireless network to which you plan to connect the product. Use one of the following procedures to connect the product to the wireless network. ● Connect the product to a wireless network using WPS by using the control panel menus ● Connect the product to a wireless network using a USB cable If your router supports Wi-Fi Protected Setup (WPS), use that method to add the product to your network. This is the simplest way to set up the product on a wireless network. NOTE: Apple AirPort wireless routers do not support WPS button setup. If your wireless router does not support Wi-Fi Protected Setup (WPS), obtain the wireless router network settings from your system administrator, or complete the following tasks: ● Obtain the wireless network name or service set identifier (SSID). ● Determine the security password or encryption key for the wireless network. ENWW Software for Mac 29