HP LaserJet Pro 300 HP LaserJet Pro 300 and 400 Color M351 and M451 - User Gui - Page 99
Replace <color>, Supplies low, Unsupported <color> Press [OK] to continue, Used <color> in use
View all HP LaserJet Pro 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Replace Description The print cartridge is at the end of its useful life, and the product is customer configured to stop printing when it reaches the very low state. Recommended action To ensure optimal print quality, HP recommends replacing the print cartridge at this point. You can continue printing until you notice a decrease in print quality. Actual cartridge life may vary. Once an HP supply has reached very low, HP's premium Protection Warranty on that supply has ended. All print defects or cartridge failures incurred when an HP supply is used in continue at very low mode will not be considered to be defects in materials or workmanship in the supply under the HP Print Cartridge Warranty Statement. Supplies low Description More than one supply item is low. Recommended action Check the supply level gauges on the control panel, or print a supplies status page to determine which print cartridges are low. Printing will continue until a Very Low message displays. Consider having replacement supplies on hand. Unsupported Press [OK] to continue Description The product has detected a print cartridge that was not made by HP. Recommended action Press the OK button to continue printing. If you believe you purchased an HP supply, go to www.hp.com/go/anticounterfeit. Service or repairs that are required as a result of using unsupported supplies is not covered under HP warranty. Used in use Description You are using a print cartridge that reached the default low threshold while it was installed in a product. Recommended action Printing can continue, but consider having a replacement supply on hand. ENWW Solve problems with supplies 81