HP LaserJet Pro 300 HP LaserJet Pro 300 and 400 Color M351 and M451 - User Gui - Page 35

Service menu, print output. Items that have asterisks * indicate the factory default setting. - toner

Page 35 highlights

Service menu Use this menu to restore default settings, clean the product, and activate special modes that affect print output. Items that have asterisks (*) indicate the factory default setting. Menu item Cleaning Page Sub-menu item USB Speed Less Paper Curl Archive Print Firmware Date Restore Defaults HP Smart Install High* Full On Off* On Off* On* Off Description Use this option to clean the product if you see toner specks or other marks on the printed output. The cleaning process removes dust and excess toner from the paper path. When you select this item, the product prompts you to load plain paper in Tray 1 and then press the OK button to start the cleaning process. Wait until the process is complete. Discard the page that prints. NOTE: For models that do not have an automatic duplexer, the product prints the first side and then prompts you to remove the page from the output bin and reload it in Tray 1, keeping the same orientation. For the product to actually operate at high speed, it must have high speed enabled and be connected to an EHCI host controller that is also operating at high speed. This menu item also does not reflect the current operating speed of the product. If printed pages are consistently curled, use this option to set the product to a mode that reduces curl. If you are printing pages that will be stored for a long time, use this option to set the product to a mode that reduces toner smearing and dusting. Displays the current firmware datecode. Sets all customized menu settings to the factory default values. Enable or disable the HP Smart Install tool. Disable the tool if you want to connect to a network by using an Ethernet cable. If you disable HP Smart Install, you must use the product software CD to install the product software. ENWW Service menu 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242

Service menu
Use this menu to restore default settings, clean the product, and activate special modes that affect
print output. Items that have asterisks (*) indicate the factory default setting.
Menu item
Sub-menu item
Description
Cleaning Page
Use this option to clean the product if you see toner
specks or other marks on the printed output. The
cleaning process removes dust and excess toner
from the paper path.
When you select this item, the product prompts you
to load plain paper in Tray 1 and then press the
OK
button to start the cleaning process. Wait until the
process is complete. Discard the page that prints.
NOTE:
For models that do not have an automatic
duplexer, the product prints the first side and then
prompts you to remove the page from the output bin
and reload it in Tray 1, keeping the same orientation.
USB Speed
High
*
Full
For the product to actually operate at high speed, it
must have high speed enabled and be connected to
an EHCI host controller that is also operating at high
speed. This menu item also does not reflect the
current operating speed of the product.
Less Paper Curl
On
Off
*
If printed pages are consistently curled, use this
option to set the product to a mode that reduces curl.
Archive Print
On
Off
*
If you are printing pages that will be stored for a long
time, use this option to set the product to a mode
that reduces toner smearing and dusting.
Firmware Date
Displays the current firmware datecode.
Restore Defaults
Sets all customized menu settings to the factory
default values.
HP Smart Install
On
*
Off
Enable or disable the HP Smart Install tool.
Disable the tool if you want to connect to a network
by using an Ethernet cable.
If you disable HP Smart Install, you must use the
product software CD to install the product software.
ENWW
Service menu
17